Web Analytics Certified Course for Your Skill Upgrade and Carrer

When traveling by car it is important to check all the necessary features and services provided by the car. Some of the most vital features include: checking the oil level and the filters, Check the power steering and brake fluid, check the cable heater and air conditioner in case of a seasonal trip. Additional things you should check before is how high and low the beam headlights are is the functionality of the fuses and horn if they are working well and the coolant. But one of the most the major thing we need to check is related to tire. It is very dangerous to travel to far places without knowing the condition of the tires you are going to travel with.

For example, if you were traveling to some designated location and along the way you ran over some obstacles, suddenly there was a sign indicating that one of your tires is having a problem. What is recommended for you to do is to check the condition of your tires. In this article, we will show you the steps of action you need to do to safely solve this problem.

Finding the proper location

This is the most important first step is to find a safe location. What you need to do the first thing you realize that your tire is acting out of the ordinary. What you need to do is to slow down the speed you are going, once slowed try looking for the spot where you can stop and park safely. The most ideal spot to stop is the spot where there is no car around, the less crowded it is the better. If you don’t manage to find a proper place to stop, continue forward at a slow speed. This is to ensure that you won’t run into any accident when things start to escalate.

Turn of the Hazard Light

The light was built-in to help captivate the attention of the other drivers. So we could utilize this light to our advantage by using it to inform the people who are passing by that we are currently having issues with our car. After using the hazard light instantly find a spot to stop and check for the problem.

Using the parking brake

After you found a place to stop, apply the parking brake to avoid the car from moving to undesired places and to avoid it from moving when we are changing the tire.

Replacing the tire

Once you stopped immediately find the tire with the damage, then set up equipment to change the tire. Some of the equipment you need are a spare tire, a wrench, and a jack. First, make sure that you applied the parking brake and use a small piece of wood to avoid the vehicle from coming off balance, then place the jack in the proper position. Then attempt to raise the vehicle to about 6 inches of the ground, but never stay under it cause the jack may fail to lift the vehicle. After raising the car use the wrench to unscrew the lug nuts, slowly remove them along with the tire. Replace the damaged tire with a spare tire. Continue your adventure but towards the car service to change the tire, do this as soon as you are done changing your tire.